Elena Hendrix. Pendant Lights. February 17th , 2018.
The lamp globes are what make the character of the pendant glow. It may be made of old lamp shade frames or it may even be a totally new creation of the home owner, or a brand new frame bought from the local light store. Recessed lighting is all very nice in its understated way but the good old pendant light still has a lot going for it. In fact, in some situations, a pendant light really is the only rational choice. Forget glass blown shades filled with dead flies; the modern pendant light bears little relation to those old things, although, of course, if youre after 1950s realism there is no other choice.
You have to ensure to look for a place that is most apt for placing the pendant light fixtures where you plan to put it. One can even take the assistance of a knowledgeable person to help you with placing the fixtures. You need to identify the correct place for placing the fixtures as they should not be in a place where there are chances of someone bumping their head into it. Make sure to test it out and check the elevation so that you will know that you will be mounting it in an appropriate spot.
The style of the pendant determines the bulb required. Entryways need to have pendant lights seven feet above the floor. A pendant in the dining room needs to be at least 30 inches above the table. Pendants used for a kitchen island need to be 30 to 40 inches above the counter. The height of the tallest person in the home needs to be considered. Make sure all pendants are at least 20 to 25 inches above the top of the tallest persons head. Custom Lighting has a reputation as the designer lighting company of Australia.
Most people that have a home that is not being newly built desire to replace their current lighting with pendant lights, which is a good thing because these lights offer better benefits compared to the ordinary lights fixtures that every household in the neighborhood has. For one, pendant lights are a lot brighter than ordinary lights, and they are fancier compared to other lights. You must be aware about all the dangers that you may have to face without sufficient knowledge of the installation process of the pendant light fixtures.
Ideally, you want to use a circuit tester to make sure the power is off to the light before touching the wiring. Assuming the power is off, start by removing the old fixture. If youre replacing a ceiling fan with a pendant, remove the blades first. It makes the process much easier. Remove the plastic wire nuts from the wires, disconnect the wires, then remove the mounting bracket. Replace the bracket with the new bracket that came with the light. Once the bracket is installed, its time to connect the wires. Follow the diagram that came with the light.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Birthplaceofspeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.