Pendant Lights. Friday , February 09th , 2018 - 12:17:47 PM
A pendant light, which is also sometimes referred to as a suspender or drop, is a single light that is hung from the ceiling and suspended by a long electrical cord where electric current is supplied to light up the bulb, which may either be made of fluorescent or incandescent. Although there is a minor disadvantage in using a pendant glow instead of a regular lighting fixture (the illumination that the pendant glow emits is limited), the advantages brought about by its use far outweighs the single nuisance of luminosity limitation.
Ideally, you want to use a circuit tester to make sure the power is off to the light before touching the wiring. Assuming the power is off, start by removing the old fixture. If youre replacing a ceiling fan with a pendant, remove the blades first. It makes the process much easier. Remove the plastic wire nuts from the wires, disconnect the wires, then remove the mounting bracket. Replace the bracket with the new bracket that came with the light. Once the bracket is installed, its time to connect the wires. Follow the diagram that came with the light.
The style of the pendant determines the bulb required. Entryways need to have pendant lights seven feet above the floor. A pendant in the dining room needs to be at least 30 inches above the table. Pendants used for a kitchen island need to be 30 to 40 inches above the counter. The height of the tallest person in the home needs to be considered. Make sure all pendants are at least 20 to 25 inches above the top of the tallest persons head. Custom Lighting has a reputation as the designer lighting company of Australia.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Birthplaceofspeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.