Krista Kinney. Pendant Lights. February 07th , 2018.
In most cases, white goes to white, black to black and ground to ground, but every house, especially older ones, can be a bit different. The ground wire connects to the ground screw on the bracket. Before you slide the new mini pendant lights onto the mounting bracket, add new wire caps to the connections. Thats really all there is to it. If you are adding new junction boxes where none existed before and havent done that before, you may want to call in a trusted friend or a professional electrician to help you as youll need to figure out the wiring in your home and how to run the wires to the location of the new fixture.
Ideally, you want to use a circuit tester to make sure the power is off to the light before touching the wiring. Assuming the power is off, start by removing the old fixture. If youre replacing a ceiling fan with a pendant, remove the blades first. It makes the process much easier. Remove the plastic wire nuts from the wires, disconnect the wires, then remove the mounting bracket. Replace the bracket with the new bracket that came with the light. Once the bracket is installed, its time to connect the wires. Follow the diagram that came with the light.
These days the pendant light fixtures have really become a fashionable option for a lot of people. Most of the people are starting to prefer these pendant light fixtures than other forms of light as they are now coming up in so many designs and variations for one to choose from. It is necessary that you hire a person to fix up the pendant lights only after assessing his capabilities in fulfilling the job perfectly. For people that are building a brand new home and are considering getting pendant lights, you should know that it will not be such an easy task installing them.
You can install a multiple pendant over your kitchen or dining room table as a sole source of illumination. This will not only provide ample light, but also a wonderful focal point and conversation piece. Pendants are great in the kitchen because they provide a way to break up the typical horizontal effect of counters, cabinets, and appliances. Deciding to use glass pendant light fixtures in your design is only the first step. The fun part is yet to come when you will start to browse the literally thousands of designs available. There is a style and design for everyone, which is part of the reason why these lights are so popular.
The type of bulb to be used would really depend on the taste of the homeowner. If he or she wants a warm illumination or glow, then the incandescent bulb is the way to go. If this type of bulb is used, a light dimmer may be used to control the dimness or brightness of the light. Fluorescent bulbs are not susceptible to this kind of effect. The length of the light bulb from the ceiling is another consideration which is left to the discretion of the home owner. If, however, the pendant glow is to be used for the illumination of a table, the suggested distance between the table and the lamp is usually 48 inches or two feet.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Birthplaceofspeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.