Pendant Lights. Sunday , February 11th , 2018 - 13:26:03 PM
Pendant lights are an excellent way of setting up task lighting. This can be over a kitchen island, study table, bedroom, a corner of the living room, etc. This set up concentrates light only on that portion which is needed for work. When required to light up a huge area and at the same time maintain uniform light throughout, the one system is the best. The best example here can be restaurant lighting. A restaurant is a place where guests are seated on different tables and all tables require uniform lighting. The light should be bright enough to help them enjoy a comfortable meal.
Ideally, you want to use a circuit tester to make sure the power is off to the light before touching the wiring. Assuming the power is off, start by removing the old fixture. If youre replacing a ceiling fan with a pendant, remove the blades first. It makes the process much easier. Remove the plastic wire nuts from the wires, disconnect the wires, then remove the mounting bracket. Replace the bracket with the new bracket that came with the light. Once the bracket is installed, its time to connect the wires. Follow the diagram that came with the light.
The type of bulb to be used would really depend on the taste of the homeowner. If he or she wants a warm illumination or glow, then the incandescent bulb is the way to go. If this type of bulb is used, a light dimmer may be used to control the dimness or brightness of the light. Fluorescent bulbs are not susceptible to this kind of effect. The length of the light bulb from the ceiling is another consideration which is left to the discretion of the home owner. If, however, the pendant glow is to be used for the illumination of a table, the suggested distance between the table and the lamp is usually 48 inches or two feet.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Birthplaceofspeed claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.